Inspur TS860 User Manual page 10

minutes, then the indicator light skips starting process and directly to the power
dissipation display stage.
2. Once the BMC starts, it will send the OS starting process to the indicator light：
a. if the operating system has been started, the indicator light will quickly finish the
starting process bar to jump to power dissipation display stage
b. If not, BMC will send the real-time OS process to indicator light, and indicator
light displays in real-time pulse until the starting completes and jumps to power
dissipation display stage.
Power dissipation display stage
Green
Blue
Yellow
Note: The light color is modified according to the latest BMC detection data：
1, According to CPU utilization: if operating system has a running agent, then it can
obtain the CPU utilization.
2, According to CPU temperature: indicator lights display according to CPU
temperature if it cannot obtain the CPU utilization.
Dual 4-way mode: indicator light divides into two, the left part correspond to the down 4-way
and the right part correspond to the up 4-way. The process and the power dissipation display the
same as single 8-way.
● View of front control panel
Information
Status
ID indicator
indicator indicator
CPU utilization is lower than 20%
CPU temperature is lower than 50℃
CPU utilization is between 20%~60%
CPU temperature is between 50℃~65℃
CPU utilization is between 60%~100%
CPU temperature is higher than 65℃
Front USB
ports1,2
Reset
button
Serial port
Power button
Service for
computing
module2
Service for
computing
module1