Inspur TS860 User Manual page 33

5. Enter RED HAT ENTERPRISE LINUX 6 interface, select [Next] to continue.
6. Enter "What language would you like to use during the installation process?" interface,
select the language you need during the installation, here we select "English(English)", and then
select [Next] to continue.
7. Enter "Select the appropriate keyboard for the system" interface, select keyboard type
according to actual need, here we select "US.English", and then select [Next] to continue.
8. Procedure enters: "What type of devices will your installation involve?"
The default is local installation, select "Basic Storage Devices" and then select [Next] to
continue.
9. Procedure enters: "Please name this computer. The hostname identifies the computer on a
network." Interface, please input Hostname.
In this interface, you can also select [Configure Network] on the left bottom to do network
configuration, adding or deleting network card to configure network IP address. Finishing network
configuration, press [Next] to continue.
10. Procedure enters: "Please select the nearest city in your time zone:" interface, select
"Asia/shanghai" and then select [Next] to continue.
11. Procedure enters Root Password setup interface, set according to your need, password
should have at least 6 figures, and then select [Next] to continue.
12. Procedure enters: "Which type of installation would you like?" interface, including the
following options:
Use All Space
Replace Existing Linux System(s)
Shrink Current System
Use Free Space
Create Custom Layout
This installation takes custom manual partitioning for example, select "Create Custom layout"
and then select [Next] to continue.
13. Procedure enters "Please Select A Device" interface, system displays detected storage
device. Please select the hard disk need installing system according to actual needs. If there is
already partition on hard disk, it will display the existing one, if you do not need it, you can delete
it.
14.Select Free space and other existing partition in hard disk, and click [Create], it prompts
"Create Storage". Select the type of partition you want to create according to your need, and then
click [Create], the system will pop up "Add Partition" window, create partitions according to