Table of Contents
Advertisement
Chapter Three System Setup
In this chapter, the jumper of motherboard and BIOS function setup of this server
are introduced. Only operator or administrator with qualifi cation of system maintenance
can implement these operations described in this part.
3.1 Motherboard BIOS Setup
BIOS is a basic input and output system. With some special setting programs, it
can adjust the system parameter and the hard disk parameter. As BIOS has great infl u-
ence on the starting and running of the system, setting parameters improperly may
arise the confl ict among hardware resources, or affect the system's performance. Hence
understanding the BIOS setup is signifi cant to the confi guration of your server. If there
is no special requirement, we suggest you use the default value and not alter the param-
eters.
Notes:
1.Before the server BIOS setup is altered, please record the corresponding origi-
nal setup. Hence when there are operating problems in the system due to the alteration,
the setup can be reversed.
2.The factory default system setup is usually the optimized setup. Don't try to al-
ter the parameters before you understand their denotations.
3.The common setup is introduced in detail in this chapter. For items less used in
the application, this chapter only offers simple instruction or just omits the instruction.
4.The contents of the BIOS may differ due to the different confi gurations of prod-
ucts; no detailed introduction will be provided here.
3.1.1 How to Enter the BIOS Setup
Power up and start the server. When the picture of "Press DEL to run Setup. Press
Tab to display BIOS POST Message. Press Alt+F2 to run EzFlash" is displayed, press
[DEL] and then the system enters BIOS setup.
If the system does not enter BIOS setup after previous steps, please press [Ctrl]-
[Alt]-[Del] at the same time to reset the system, and repeat operations above. (If the
prompt displays to press [DEL] again, please press it quickly.)
Chapter Three System Setup
11
Advertisement
Table of Contents
