Chapter Five Sas Raid Of Ir Model Setup Chapter Five Sas Raid Of Ir Model Setup; How To Enter Sas Bios; The Application Of Control Keys; Sas Bios Setting - Inspur NF5220 Manual

Chapter Five Set SAS RAID of IR Model Chapter Five Set SAS RAID of IR Model
This chapter mainly introduces the IR model confi guration and using method of
onboard LSI SAS 1068E controller; the IR model of onboard SAS controller provides
default supports of RAID0, RAID1, RAID1E. In case that the motherboard of the serv-
er you purchased does not integrate SAS controller, you can skip this chapter.
The pictures of this chapter are only for reference and the version of information
in the picture may be inconsistent with the actual version.

5.1 How to Enter SAS BIOS

5.1 How to Enter SAS BIOS
1. The screen will display the following prompt during the booting process of the
system:
Press Ctrl-C to Start LSI Corp Confi guration Utility...
2. At this point, press <Ctrl> <C> keys to enter SAS controller setting interface.

5.2 The Application of Control Keys

5.2 The Application of Control Keys
Key
<↑><↓><←><→> For moving cursor in different menus
<+><—>
[Enter]
<Esc>
<F1>/Shift>-<1>

5.3 SAS BIOS Setting

5.3 SAS BIOS Setting
I. Adapter Properties menu
After entering the SAS BIOS main interface, such information as the name of the
SAS controller and Firmware, etc. will be displayed; meanwhile, the Boot order （ Boot
order option ） of SAS controller can also be set in the interface. Select the control-
ler and then press [Enter] to the interface as shown below, and the system displays the
name of the SAS controller, PCI slot, PCT address and Firmware edition, etc., most of
which are only for display but not for setting.
Chapter Five SAS RAID of IR Model Setup Chapter Five SAS RAID of IR Model Setup
For changing the content of the item value
For selecting submenu and displaying all the items in the
selected menu
For existing menu or going back to the superior menu from
the submenu
For entering the help menu
27
Description