Chapter Four: Common Problems And Troubleshooting - Inspur TS860 User Manual

23. Procedure enters "Set Up Software Updates" interface, click [Forward] to continue.
24. Procedure enters "Create User" interface, user can set user name, password, add a new
user according to actual need, and then click [Forward] to continue.
25. Procedure enters "Date and time" interface, please set the correct time and date, and then
click [Forward] to continue.
26. Procedure enters "Kdump" interface, set according to actual need, and click [Finish] to
complete the installation.
27. Input Username and Password to login the system.
3.2.3 Install VGA card driver
After the installation of OS, You can manually load VGA card driver using the attached
driver CD
1. insert Inspur driver CD into optical disc driver, click Terminal menu in
Applications→System Tools, and input in the window:
#mount /dev/cdrom
#cd /mnt
#cd
driver/video/linux/video
#cp xorg782-0.99-10.x86_64.rpm /tmp
#cd /tmp
#rpm -ivh xorg782-0.99-10.x86_64.rpm --force
2.restart system, please remove driver CD

Chapter Four: Common Problems and Troubleshooting

This chapter focuses on the common problems and Trouble-shooting of the server. If you are
not sure about the cause of a failure and its removal method, please contact our customer service
center for solution.
Note: When replacing or installing hardware device for the server, you should disconnect
the power cable from the server completely. It is recommended to use the antistatic wrist strap and
/mnt