Inspur TS860 User Manual page 52

Inspur.
①
In Firmware Update menu interface, click [Enter Update Mode]. In the confirmation
pop-up window, click [OK], wait to enter the following interface.
②
click "Browse" after input box and select the ROM mirroring (* .ima file) you want to
update from the client's disk, as shown below:
③
After the upgrade file is selected, click [Upload], the new window will pop up after file is
uploaded, then click [Check this option to do full firmware flash], [proceed] button, BMC
will automatically complete the burn process.
Note: Do not disconnect the network during upgrading process. After the upgrade is
complete d, Management Card restarts, Web interface needs to re-login.
2, Protocol Configuration
This menu can set mirroring transfer protocol type when BMC Firmware is upgrading, the
default is via HTTP / HTTPS protocol mode.