Clear Cmos - Inspur TS860 User Manual

Select this option and press [enter] key, in the pop-up prompt, select [Yes], the current setting
value of all BIOS options will be saved as user default options.
● Discard Changes
Select this option and press [enter] key, in the pop-up prompt, select [Yes], modifications in
the BIOS setting will be given up, this operation will not exit BIOS setup.

2.2 Clear CMOS

Clear basic IO module
If the following operations are needed, please get the authorization of Inspur
Group Co., Ltd. Clear basic IO module according to the following methods:
1． Power off the system (turn off the AC power);
2． Press plastic key of basic IO module handle on the back of the chassis. open the module
handle.
3． Hold module handle and pull afterwards, and clear the module from the chassis.
Clear CMOS
The following figure shows the Clear CMOS jumper position in the IO Riser, and
the following jumper state is default: