Show Eventlog - Quanta Computer T5016-LB8D Use Manual

UANTA COMPUTER INC.

6.1.4 show eventlog

This command displays the event log, which contains error messages from the system, in the Primary
Management System or in the specified unit. The event log is not cleared on a system reset.
Syntax
show eventlog [unit]
unit - The unit number of the remote system. The range is 1 to 8.
unit parameter is only support for stacking platform.
!
Default Setting
None
Command Mode
Privileged Exec
Display Message
File: The file in which the event originated.
Line: The line number of the event.
Task Id: The task ID of the event.
Code: The event code.
Time: The time this event occurred.
Event log information is retained across a switch reset.
!
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
48/1523