Entry Into The Maintenance Mode - Brother DCP130C Service Manual

9.1 ENTRY INTO THE MAINTENANCE MODE

Press the Menu and Black Start (Mono Start) keys. Next press the
machine enter the maintenance mode.
The machine displays "
initial stage of the maintenance mode, a mode in which the machine is ready to accept entry from
the keys.
To select one of the maintenance-mode functions listed in
digit function code using the
maintenance-mode function are described in
NOTES • To exit from the maintenance mode and switch to standby, enter 9 twice using the /
• Pressing the Stop/Exit key after entering only one digit restores the machine to the
• If an invalid function code is entered, the machine resumes the initial stage of the
and OK keys in the initial stage of the maintenance mode.
initial stage of the maintenance mode.
maintenance mode.
" on the LCD, indicating that it is placed in the
/ and OK keys on the control panel. (The details of each
Section 9.4.)
9 - 1
key four times to make the
Section 9.2, enter the corresponding 2-
Confidential