Brother DCP130C Service Manual page 311

EEPROM CUSTOMIZING CODES
This function allows you to customize the EEPROM according to language, function settings, and
firmware switch settings.
Refer to the "EEPROM Customizing Codes List" on the next page.
Operating Procedure
(1) Press the Menu and Black Start (Mono Start) keys. Next press the
the machine enter the maintenance mode.
The machine displays "
initial stage of the maintenance mode, a mode in which the machine is ready to accept entry
from the keys.
(2) Start customizing the EEPROM (with Function code 74) as follows:
Enter 7 and 4 in the initial stage of the maintenance mode using the / and OK keys.
The current customizing code appears on the LCD.
(3) Enter the desired customizing code using the / and OK keys.
Letters "A" through "F" can also be entered using the / and OK keys.
The newly entered code appears.
NOTE: If a wrong 4-digit code is entered, the machine will malfunction.
(4) Press the Black Start (Mono Start) key.
The machine saves the setting and returns to the initial stage of the maintenance mode.
If you press the Stop/Exit key or no keys are pressed for one minute in the above procedure, the
machine stops the procedure and returns to the initial stage of the maintenance mode.
" on the LCD, indicating that it is placed in the
App. 3-1
key four times to make
Confidential