Brother DCP130C Service Manual page 106

Error Code
(Hex)
BD Black level data error.
BE-DE Not used.
DF Not used.
(Modem error.)
E0, E1 Not used.
E2
Wired LAN MAC address
not registered. *
E3
Wireless LAN MAC
address not registered. *
E4
Not used.
E5 Not used.
(Write error in EEPROM
of the cordless handset.)
E6
Write error in EEPROM.
E7
Not used.
(No response from the
cordless handset.)
E8 Data scanning error during
transmission.
E9
Not used.
1
* For wired LAN-enabled models
2
*
For wireless LAN-enabled models
Symptom
1
2
4 - 1 6
Probable Cause
CIS defective
Main PCB defective
Main PCB defective
MAC address not
registered correctly
MAC address not
registered correctly
The base ID code and
cordless handset ID
code registered are
mismatched.
Main PCB defective
The base ID code and
cordless handset ID
code registered are
mismatched.
CIS defective
Main PCB defective
Solution
Replace the scanner
cover (scanner unit).
Replace the main PCB.
Replace the main PCB.
Replace the main PCB.
Replace the WLAN
PCB.
Reregister the cordless
handset ID code.
Replace the cordless
handset
Replace the cordless
PCB.
Replace the main PCB.
Reregister the cordless
handset ID code.
Replace the cordless
handset
Replace the cordless
PCB.
Replace the scanner
cover (scanner unit).
Replace the main PCB.
Confidential