Brother DCP130C Service Manual page 346

Selector
No.
Compression threshold level for
1
voice signals inputted via the
|
telephone line in the built-in
3
TAD operation
Compression threshold level for
4
voice signals inputted via the
|
handset in the built-in TAD
6
operation
Impedance switching control in
7
pulse dialing
Prompt beep when the memory
8 area for the activity report
becomes full
NOTE: Selectors 1 through 6 are applicable to models with built-in TAD.
NOTE: Selectors 7 and 8 are applicable only to the European versions.
Selectors 1 through 6: Compression threshold level for voice signals inputted via the telephone
If voice signals inputted via the telephone line are below the level specified by these selectors, the
TAD interprets those received voice signals as no signal, compressing the recording time.
Selector 8: Prompt beep for activity report
This selector determines whether or not to beep if the memory area for the activity report becomes
full, for prompting you to print out the report. (Printing it out will clear the memory area.)
WSW29
(Function setting 7) (Not used.)
Function
line in the built-in TAD operation
App. 4-33
Setting and Specifications
No. 1 2 3
0 0 0 :
0 0 1 :
0 1 0 :
0 1 1 :
1 0 0 :
1 0 1 :
1 1 0 :
1 1 1 :
No. 4 5 6
0 0 0 :
0 0 1 :
0 1 0 :
0 1 1 :
1 0 0 :
1 0 1 :
1 1 0 :
1 1 1 :
0: OFF
0: No
-47.0 dBm (A)
-48.5 dBm (B)
-50.0 dBm (C)
-51.5 dBm (D)
-53.0 dBm (E)
-54.5 dBm (F)
-56.0 dBm (G)
OFF (H)
-44.0 dBm (A)
-45.5 dBm (B)
-47.0 dBm (C)
-48.5 dBm (D)
-50.0 dBm (E)
-51.5 dBm (F)
-53.0 dBm (G)
OFF (H)
1: ON
1: Yes
Confidential