Brother DCP130C Service Manual page 285

Purge types, ink usage, purge counts, and purge codes
Purge Types
Normal purge This purge operation removes
dried ink sticking to the head
nozzles.
Periodical reset This purge operation removes
purge any bubbles that have
accumulated in the ink supply
tubes.
Power purge More powerful than a
periodical reset purge, this
purge operation is for
removing stubborn clogging
from the head nozzles and ink
supply tubes.
Initial purge When the user loads ink
cartridges for the first time,
this purge operation
automatically runs to refill the
ink supply tubes and print
head with fresh ink.
User reset purge This purge operation should
be performed if the print
quality problem persists after
a user has performed the
purge operation repeatedly by
pressing the Ink (Ink
Management) key.
Engine setup This purge operation refills the
purge ink supply tubes with ink
when there is no ink in those
tubes.
(Note 1) To enter a numerical code on models having no numerical keypad, press the
times to display the numerical code to be entered and then press the OK key. After that, press
the Black Start (Mono Start) key.
Description
Black:
Per color: 0.13 mL
Black:
Per color: 0.32 mL
Black:
Per color: 0.38 mL
Black:
Per color: 2.59 mL
Black:
Per color: 0.32 mL
Black:
Per color: 2.59 mL
9 - 3 8
Purge Counts
Ink Usage
(See Note 2.)
0.21 mL Black:
Total of
colors:
0.44 mL Black:
Total of
colors:
0.59 mL Black:
Total of
colors:
2.92 mL Black:
Total of
colors:
0.50 mL Black:
Total of
colors:
2.92 mL Black:
Total of
colors:
Purge Codes
(In the
maintenance mode,
Function code 76)
(See Note 1.)
11 1
21
24 2
54
32 3
64
163 4
432
28 5
54
163 6
432
/ key several
Confidential