Brother DCP130C Service Manual page 225

(6) Enter the number of the least uneven block found in step (5).
For example, if the number of the least uneven block is +4, enter 4 using the / and OK keys
when the "PF ADJ NO. +0" is displayed on the LCD.
If the number is -4, display
NO. -0." Enter 4 using the / and OK keys.
Then press the OK key, and the machine returns to the initial stage of the maintenance mode.
(7) On your PC, drag and drop the "exitadj.prn" onto the BHL2-Maintenance Printer icon in the
Filedrgs window.
The machine displays the "RECEIVING DATA" on the LCD and prints out three sheets of
"EXIT adjust check" patterns (on
(8) On the machine, enter 5 and 8 using the / and OK keys.
The "1.PF 2.EXIT" appears on the LCD.
(9) To select the paper ejection roller adjustment, enter 2 using the / and OK keys.
The "EXIT ADJ NO. +0" appears on the LCD.
(10) Out of the three sheets of the "EXIT adjust check" patterns (on
sheet and select the block that is the least uneven print. Make a note of that block number.
(11) Enter the number of the least uneven block found in step (10) in the same way as in step (6).
Then press the OK key, and the machine returns to the initial stage of the maintenance mode.
using the / key and press the OK key to display the "PF ADJ
page 7-16 for a sample printout).
7-14
page 7-16), check the middle
Confidential