Ink Cartridge Cover, Media Module Cover, Front Cover, And Wlan Pcb - Brother DCP130C Service Manual

6.1.8

Ink Cartridge Cover, Media Module Cover, Front Cover, and WLAN PCB*

(1) Lightly lift up the front end of the lower cover and remove the ink cartridge cover.
(2) Remove the media module cover.
(3) For wireless LAN-enabled models: Proceed to step (4).
For models not supporting wireless LAN: Lightly pull up the retainer on the inside of the front
cover to release it from the lower cover. Then lightly lift up the front end of the lower cover
and remove the front cover.
Retainer
Linear boss
Front cover
6-30
*For wireless LAN-enabled models
Main PCB shield
Boss
Sockets
Latch
Boss
Cover arm
Ink cartridge cover
Actuator lever
Latch
Media module cover
(6_31)
Confidential