7/13/2019
CHAPTER 7
1.
ENTRY INTO THE MAINTENANCE MODE
To make the machine enter the maintenance mode, press the Menu button,
*, 2, 8, 6, and 4 keys in this order.
Within 2 seconds
The machine beeps for approx. one second and displays "
LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in which
the machine is ready to accept entry from the keys.
To select one of the maintenance-mode functions listed in Section 2, enter the corresponding
2-digit function code with the numerical keys on the control panel. (The details of each
maintenance-mode function are described in Section 3.)
NOTE:
• Pressing the 9 key twice in the initial stage of the maintenance mode makes the machine
exit from the maintenance mode, restoring it to the standby state.
• Pressing the S t o p button after entering only one digit restores the machine to the initial
stage of the maintenance mode.
• If an invalid function code is entered, the machine resumes the initial stage of the
maintenance mode.
http://slidepdf.com/reader/full/brother-8840d-service-manual
MAINTENANCE MODE
Brother 8840D Service Manual
MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
7-1
SERVICE MANUAL
" on the
267/361