Updating The Firmware - Extron electronics FOX Matrix 3200 User Manual

The radio buttons and check boxes associated with each address field permit the
administrator to specify specific e‑mail requirements for each recipient.
Edit these fields and controls as follows:
1. Click in the desired
2. Edit the e‑mail address as desired. Standard e‑mail address conventions
(for example: nnnnn@xxx.com) apply.
3. Press the <Tab> key on the keyboard or click in another field to exit the
Addressee
4. In the square associated with each addressee, select one or more options about which
the addressee is to be e‑mailed: missing input(s), fans, and power supply. In the floating
box that contains the input numbers, select the inputs to be monitored.
5. In the round radio buttons associated with each addressee, select whether the
addressee is to be e‑mailed of failures, fixes, both, or not to be notified.
The
None
when they are unavailable, such as when travelling or on vacation.
6. If desired, click the
7. Click the

Updating the Firmware

The firmware upgrade utility provides a way to replace the firmware that is coded on the
control board of the switcher without taking the switcher out of service.
NOTE: Upgrading the firmware does not overwrite the current configuration or
presets.
Update the switcher firmware as follows:
1. Perform steps 1 through 5 of
firmware upgrade from the Extron website.
2. Click
Run
the next page). The PC extracts the firmware update received from the Extron website
and starts the Extron Installation Program to extract the firmware file.
3. Click
Next
and places them in a folder identified in the InstallShield Wizard window.
ATTENTION:
cause the switcher to stop functioning.
NOTES:
•
•
4. Click
Finish
E-mail Addressee
field.
radio button is useful for temporarily removing personnel from the e‑mail list
Send test E-mail
button to make the e‑mail address changes take affect.
Take
Installing the
in the File Download and Security Warning dialog boxes (see
in the Firmware Upgrade window. The program extracts the firmware files
The firmware file must have an .s19 extension. Other file types can
Note the folder to which the firmware file is saved. When downloaded
from the Extron website, the firmware is placed in a subfolder of:
• Windows 7 or Windows 8:
• Older versions: \
C: Program Files\Extron\Firmware
The original factory‑installed firmware is permanently available on the matrix
switcher. If the attempted firmware upload fails, the switcher reverts to the
factory‑installed firmware.
to exit the program.
FOX Matrix 3200 and 7200 Switchers • Matrix Software
field. The graphic cursor becomes a text cursor.
button to test the e‑mail function.
Software, on page 72, to download the
\
C: Program Files (x86)\Extron\Firmware
E-mail
figure 38 on
80