Recalling A Setup; Default Setup; Triggering - Tektronix TPS2000 Series User Manual

Recalling a Setup

The oscilloscope can recall the last setup before the oscilloscope was
powered off, any saved setups, or the default setup. See page 9- - 28.

Default Setup

The oscilloscope is set up for normal operation when it is shipped
from the factory. This is the default setup. To recall this setup, push
the DEFAULT SETUP button. To view the default settings, refer to
Appendix D: Default Setup.

Triggering

The trigger determines when the oscilloscope starts to acquire data
and display a waveform. When a trigger is set up properly, the
oscilloscope converts unstable displays or blank screens into
meaningful waveforms.
Triggered waveform
For oscilloscope-specific descriptions, refer to page 2- - 10 in the
Operating Basics chapter and page 9- - 36 in the Reference chapter.
TPS2000 Series Digital Oscilloscope User Manual
Understanding Oscilloscope Functions
Untriggered waveforms
3- 3