Tektronix TPS2000 Series User Manual page 247

Oscilloscope EMC Certifications and Compliances (Cont.)
Australia/New
Zealand
Oscilloscope Safety Certifications and Compliances
Certifications
CSA Certified
Power Cords
Pollution Degree 2
Overvoltage
Category
Adjustment (Factory Calibration) Interval
The recommended calibration interval is one year
TPS2000 Series Digital Oscilloscope User Manual
Meets the intent of Australian EMC Framework as demonstrated to the
following specification: AS/NZS 2064.1/2
CAN/CSA C22.2 No. 1010.1, 2004
UL61010-1, 2004
CSA Certification includes the products and power cords appropriate
for use in the North America power network
All other power cords supplied are approved for the country of use
Do not operate in environments where conductive pollutants may be
present.
Category: Examples of Products in this Category:
CAT III Distribution-level mains, fixed installation
CAT II Local-level mains, appliances, portable equipment
CAT I Signal levels in special equipment or parts of equipment,
telecommunications, electronics
Appendix A: Specifications
A- 15