Tektronix TPS2000 Series User Manual page 181

Average. Use Average acquisition mode to reduce random or
uncorrelated noise in the signal you want to display. Data is acquired
in sample mode, then a number of waveforms are averaged together.
Select the number of acquisitions (4, 16, 64, or 128) to average for
the waveform.
RUN/STOP Button. Push the RUN/STOP button when you want the
oscilloscope to continuously acquire waveforms. Push the button
again to stop the acquisition.
SINGLE SEQ Button. Push the SINGLE SEQ button when you want
the oscilloscope to acquire a single waveform and then stop. Each
time you push the SINGLE SEQ button, the oscilloscope begins to
acquire another waveform. After the oscilloscope detects a trigger it
completes the acquisition and stops.
Acquisition mode
Sample, Peak Detect
Average
TPS2000 Series Digital Oscilloscope User Manual
SINGLE SEQ button
Sequence is complete when one acquisition is
acquired
Sequence is complete when the defined number of
acquisitions is reached (refer to page 9--2)
Reference
9- 5