Image Transfer - Panasonic KX-HCM10 Operating Instructions Manual

Image Transfer

Image Transfer window can set the Image Transfer feature. The Network
Camera can buffer images and send the images via e-mail or FTP . The request to
send the image is initiated by a contact closure from an external sensors/devices
connected to the I/O Connector using the Alarm mode. The external sensors/
devices is customer provided. The images can also be sent in the interval of time
using the Timer mode.
Non transfer : No trigger is set.
Alarm mode
Timer mode
Note
The Alarm and Timer mode can not be set at the same time.
66
: The alarm trigger activates transferring the image. Please refer
to Page 67.
: The timer trigger activates transferring the image. Please refer
to Page 72.
Operating Instructions