Panasonic KX-HCM10 Operating Instructions Manual page 74

Instructions for the data fields
a.
Buffers or transfers by the timer trigger.
b.
Active Time of Trigger
Always: always activates the timer trigger. The timer trigger interval
can be set in (e.) Image Buffer Frequency Setting.
Operational between: Sets the starting and stopping time of the
primary time. The day of the week can be set by checking.
Starting and stopping time is set only in 24 h time mode.
Note
The first image is buffered or transferred at the starting time. The later
images are buffered or transferred at the interval of the (e.) Image
Buffer Frequency Setting.
c.
Secondary time is active except the primary time.
The timer trigger interval in the secondary time can be set in (e.) Image
Buffer Frequency Setting.
d.
Sets the image resolution and image quality.
Image resolution: 640 x 480/320 x 240/160 x 120
Image quality: Favor Clarity/Standard/Favor Motion
e.
Image Frequency: Sets the interval to send the image.
Maximum number of images per each trigger:
Selects the number of buffering frames from numbers 1 to 400.
f.
Selects Transfer Method.
Non transfer: Activates the only buffering.
[Primary] and [Secondary] on the Operation Bar can be displayed to
view the Buffering Image screen.
FTP: Enters the server address*
Login ID*
name*
Over write setting:
Selects [Over Write...] to over write the transferred image or [Add
time...] to save each transferred image.
74
and password*
2
including full path.
2
or Host Name*
1
to access the FTP server and upload file
2
Operating Instructions
, Port no. (1 – 65535),
2