Connecting The Power Suplly - Panasonic KX-HCM10 Operating Instructions Manual

Operating Instructions

1.4.4 Connecting the Power Suplly

1.
Connect the DC plug of the AC adapter to the DC IN jack of the Network
Camera and connect the AC plug of the AC adapter to the power outlet to turn
on the Network Camera.
Power Outlet
(120 V AC, 60 Hz)
AC plug
AC adapter
(included
accessory)
Notes
• Plugging in/off the AC adapter means turning on/off the Network
Camera. The AC adapter should be located near the unit and be easily
accessible.
• Use Only with Panasonic AC adapter (Order No. PQLV10Y).
2.
After the AC adapter is connected to the outlet, the Power LED turns on and
the Pan/Tilt moves to the center position.
DC plug
* Thread the AC adapter line
through the hook downward.
* Thread the AC adapter
line through the hook
upward if it is convenient.
19