Notes
•
The Network Camera automatically restarts after saving the network
configuration.
•
Power LED blinks during getting the IP address from the DHCP server.
•
Overlapped IP address displays the next box.
Confirm the IP address and try to set up again. If you can not set up,
please ask the ISP or the network administrator.
6.
Click [OK].
To the Top Page, Click [OK].
To confirm the parameters after this operation.
Please refer to Section 1.5.3 Preliminary Operation – Accessing the Top
Page.
Notes
•
The proxy server may prevent you from connecting directly to the
Network Camera. Please refer to Section 1.5.2 Configuring the Proxy
Server.
•
To access the Top Page in the LAN, the Network Camera needs the
private IP address in the same class of the PC. Please refer to Page 33.
26
Operating Instructions