About Image Buffer/Transfer - Panasonic BL-C30 Installation Manual

Troubleshooting

2.8 About Image Buffer/Transfer

Problem
The camera • Errors have occurred on the way to the E-mail or FTP server.
does not
transfer the
image by E-mail
or FTP.
• The default gateway and DNS server addresses are not
assigned correctly.
• Login ID and password for E-mail or FTP are invalid.
The camera • The image quality is not set to [Mobile Phone] on the Image
does not Buffer/Transfer page.
transfer the
image to a
mobile phone.
The image is • The transfer interval is too short.
slowed down on
the Buffered
Image page. Or
the camera
transfers the old
image.
All manuals and user guides at all-guides.com
Cause and Remedy
See the Protocol column on the Status page (see page 83 of
the Operating Instructions on the Setup CD-ROM), and
check if the error is displayed.
Assign them correctly (see page 31 of the Operating
Instructions on the Setup CD-ROM).
Make sure that you enter your correct login ID and password.
Set the resolution to [160 x 120] and the image quality to
[Mobile Phone]. Some mobile phones do not support 320 x
240 resolution.
Set the transfer interval longer than the current setting (see
page 62 or page 71 of the Operating Instructions on the
Setup CD-ROM).
Installation/Troubleshooting
34