Image Transfer - Panasonic KX-HCM230 Operating Instructions Manual

Operating Instructions

Image Transfer

Image Transfer window can set the Image Transfer feature. The Network
Camera can buffer images and send the images via e-mail or FTP. The request
to send the image is initiated by a contact closure from the external sensors/
devices connected to the External I/O using the Alarm mode. The external
sensors/devices are customer provided. The images can also be sent in the
interval of time using the Timer mode. Please make sure Date and Time has been
configured. Please refer to Page 56 about Date and Time.
Note
When you use FTP, e-mail in transferring the image, you need to set Default
Gateway and DNS Server address.
Non Transfer : Image Transfer feature is not in use.
Alarm mode
Timer mode
Note
The Alarm and Timer mode cannot be set at the same time.
64
: The alarm trigger activates transferring the image. Please refer
to Page 66.
: The timer trigger activates transferring the image. Please refer
to Page 72.