Camera Feature Locations; Front View - Panasonic KX-HCM10 Operating Instructions Manual

1.3 Camera Feature Locations

1.3.1 Front View

Power LED
During normal operation Power LED will be on in the default.
Blinking will occur during the following situation.
• During the lens center positioning after turning on the power.
• During the Update Firmware.
• During initializing after pushing CLEAR SETTING button.
• During getting the IP address from the DHCP server.
• During a camera malfunction. Please refer to Section
4.2 Troubleshooting.
Fixed Focus Lens and Pan/Tilt operation
Fixed Focus Lens can move in the Pan/Tilt operation. Operation Bar on the Single
Camera screen can operate the Pan/Tilt. The Pan/Tilt moves the lens horizontally
120° and downside 45°. Please refer to Page 47 for the Operation Bar.
Notes
• Do not force to move the lens part around the Fixed Focus Lens.
Compulsive touching may damage the Pan/Tilt motor.
• Do not touch the Fixed Focus Lens. It may leave a finger print and can
cause the image to be out of focus. This can also take away the
protective coating on the Fixed Focus Lens.
12
Power LED
(Refer to Page 81 for the Setup.)
Fixed Focus Lens
40 inches (1 m) – Infinity
Pan: - 60° to + 60°
Tilt: 0° to - 45°
Operating Instructions