Panasonic KX-HCM10 Operating Instructions Manual page 31

Operating Instructions
Port No.
Static
• IP Address
• Subnet Mask
DHCP
• Host name
Instructions for the data fields
• You can set up the port no. of the Network Camera.
(Default is 80.)
If you use more than one Network Camera with a router
(including Panasonic KX-HGW200 Gateway) on the
network, each Network Camera must be assigned its
own port no.
Unavailable port no.
1) Port no. used with other products on the network.
2) 20, 21, 25 and 110 are used in the Network Camera.
Please refer to Port Forwarding feature on Page 33.
• In case you can not use port no. 80 depending on the
ISP , please get the available port no. (Default 80) in the
global IP address from the ISP or administrator.
• Enter only the number. (1 – 65535)
Note
Certain port nos. assigned on the network devices and
the network protocol are not available e.g., FTP: 20, 21,
Telnet: 23, SMTP: 25, DNS: 53, HTTPS: 443, ICQ: 4000,
IRC: 6661 – 6667 and Network Camera: 110. The port
nos. between 50000 and 59999 are recommended to
use. To assign port nos. on a large network, please
consult and work with the ISP or administrator.
• Please check Static, when having specified IP address
assigned to the Network Camera from the ISP or
administrator. Enter the specified IP address and Subnet
Mask.
• If you use the Network Camera in the LAN, please set up
in the same class as your PC is in.
Please refer to Page 33 for the class.
• Please refer to Page 35 for the numbering.
• Please check DHCP (Dynamic Host Configuration
Protocol). The ISP uses the DHCP server function which
assigns an IP address to the Network Camera
automatically. Enter the Host name.
• Please refer to unavailable characters set 1 in Page 35
for the Host Name.
31