Alarm: Configure The Details For Image Transfer Or Recording Conditions - Panasonic WV-S2500 Series Operating Instructions Manual

2 Settings
If you select "SD memory recording" for "Trigger", select "JPEG(1)", "JPEG(2)", or "JPEG(3)" for "Recording
format", and then click the [Next] button, the JPEG recording setup menu will be displayed. (®page 53)
If you select "SD memory recording" for "Trigger", select "Stream(1)", "Stream(2)", "Stream(3)", or
"Stream(4)" for "Recording format", and then click the [Next] button, the video recording setup menu will be
displayed. (page 53)
Note
•
If you click the [Next] button, the setting items in the screen are saved.
[Back] button
If you click the [Back] button the alarm setup menu will be displayed. (®page 49)
2.3.2.4 Alarm: Configure the details for image transfer or recording
conditions
A Set FTP transfer (FTP transfer setup menu)
FTP transfer when an alarm is detected is set in this section.
Refer to page 162 for information about how to set the above screen.
[Next] button
If you select "Alarm output" in the alarm setup menu and click the [Next] button, the alarm output setup menu
will be displayed. (®page 54)
If you click the [Next] button in the alarm setup menu without selecting "Alarm output", the mail setup menu
will be displayed. (®page 55)
52 Operating Instructions