1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Security Camera
  5. KX-HCM230
  6. Operating instructions manual

Panasonic KX-HCM230 Operating Instructions Manual

Hide thumbs Also See for KX-HCM230:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Instructions Manual
Operating Instructions (Additional Features)
Model No.
The features described below are added in accordance with
our modifications in the product specifications. Read both
Operating Instructions before starting to use the product.
Additional Feature table
Adding DDNS (Dynamic Domain Name System) feature on
Configuration window and Network window
DDNS parameter is added on Configuration window displayed
by Setup CD-ROM and Network window on Setup Page of
Network Camera. DDNS feature allows you to access a
Network Camera by a domain name like
"xxxxx.viewnetcam.com" after registering for Viewnetcam
service.
Setting Home Positioning
Home Positioning allows you to fix the lens on a specific
point.
Viewing Buffered Image Screen
Images can be buffered in the internal memory of the Network
Camera. They can be viewed by clicking [Start Capture] on
Capture screen. Alarm/Timer mode in the Image Transfer on
page 13 can also buffer images.
KX-HCM10 / KX-HCM230
Additional Feature

Network Camera

Page
Page 3—Page 7
Page 8
Page 9—Page 10

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-HCM230

Summary of Contents for Panasonic KX-HCM230

  • Page 1: Network Camera

    Network Camera Operating Instructions (Additional Features) KX-HCM10 / KX-HCM230 Model No. The features described below are added in accordance with our modifications in the product specifications. Read both Operating Instructions before starting to use the product. Additional Feature table Additional Feature...
  • Page 2 Operating Instructions Additional Feature Page Viewing still images on your mobile phone Page 11 A mobile phone with colour display allows you to view still images over the Internet anywhere at any time. Adjusting Clock for Summer Time Page 12 Adjust Clock for Summer Time is added on Name/Time window.
  • Page 3 Operating Instructions Adding DDNS (Dynamic Domain Name System) feature on Configuration window and Network window DDNS parameter is added on Configuration window displayed by Setup CD-ROM and Network window on Setup Page of Network Camera. Configuration window on Setup CD-ROM Added Network window on Setup Page Added...
  • Page 4 Operating Instructions Network Parameters Table An item for a parameter DDNS is newly added on the Network Parameters Table on page 22 in the Operating Instructions. General modifications are added to the asterisks and their descriptions for reference on the table including the one for DDNS.
  • Page 5 Operating Instructions When you use a Network Camera in DHCP feature, check [DHCP] and enter the Host Name if your ISP requires. If you automatically get the address of Default Gateway and DNS server from DHCP server, you do not need to set Verify that your ISP supports DHCP.

  • Page 6: Viewnetcam Service

    Operating Instructions Viewnetcam service DDNS feature DDNS feature allows you to access a Network Camera by a domain name like "xxxxx.viewnetcam.com" after registering for Viewnetcam service. Viewnetcam server Internet This is an Illustration of KX-HCM10. A DHCP server of your ISP assigns a global IP address dynamically to the router or Network Camera.
  • Page 7 Operating Instructions DDNS registration Restart the Network Camera and insert the Setup CD-ROM in the CD-ROM drive of the PC. Click [Network Configuration]. Select a Network Camera to register for Viewnetcam service on Network Camera List window. Click [Select]. Confirm on Configuration window that Default Gateway and DNS server are correctly configured.
  • Page 8 Operating Instructions Setting Home Positioning Home Positioning allows you to fix the lens on a specific point. Lens moves to the home position when clicking Home Position button. Camera Setup window can lock the Home Positioning feature. Saving or modifying the home position button 1) Click [Program].

  • Page 9: Viewing Buffered Image Screen

    Operating Instructions Viewing Buffered Image Screen Images can be buffered in the internal memory of the Network Camera. They can be viewed by clicking [Start Capture] on Capture screen. Alarm/Timer mode in the Image Transfer on page 13 can also buffer images. The current images will be buffered in the internal memory of the Network Camera.
  • Page 10 The internal memory will be divided by the number of trigger settings in Image Transfer. If all three trigger settings are enabled, the Network Camera can buffer approximately 26 frames (KX-HCM10) or 186 frames (KX-HCM230) for each trigger setting at a resolution of 320 x 240.

  • Page 11: Viewing Still Images On Your Mobile Phone

    • Some mobile phones cannot display still images depending on their models. Refer to the Network Camera Technical Support Site at http:// panasonic.co.jp/pcc/en/ for the models that Panasonic has verified with the Network Camera. • When a Network Camera sets authentication for security, a mobile phone should support authentication feature, too.
  • Page 12 Operating Instructions Adjusting Clock for Summer Time Adjust Clock for Summer Time is added on Name/Time window. Added Instructions for the data field Adjust During Summer Time, clock is turned forward an hour. The Clock for clock will shift one hour forward at the set time on the Start Day, Summer and move back one hour at the set time on the End Day.

  • Page 13: Transferring Camera Images

    Operating Instructions Transferring camera images The Network Camera can buffer images and send them via e-mail or FTP by configuring Image Transfer. Capture, Alarm and Timer can be used simultaneously by checking [Enable] for Controls on each of their Image Transfer windows.

  • Page 14: Transfer In The Alarm Mode

    Operating Instructions Transfer in the Alarm Mode The alarm mode can transfer images via e-mail or FTP when the alarm trigger is active. Check [Enable] for Alarm Control when activating Alarm mode. Added Check [Enable] when activating Alarm mode.

  • Page 15: Transfer In The Timer Mode

    Operating Instructions Transfer in the Timer Mode The timer mode can be activated by entering the active time, the image setting, frequency setting and the transfer method on Image Transfer window. Buffered image can also be transferred via e-mail or FTP. Check [Enable] for Timer Control when activating Timer mode.
  • Page 16 Operating Instructions Login timing Login timing is added in both the Alarm Mode and the Timer Mode in the Image Transfer feature. [Every Time] or [One Time] can be selected. When selecting [Every Time], Network Camera repeats logging in and out with each transfer of one image.
  • Page 17 Operating Instructions Specifying the Pan/Tilt range on Camera Setup window Pan/Tilt range parameters are added on Camera Setup window on Setup Page of Network Camera. Vision in pan/tilt operation can be restricted. Added Instructions for the data fields Pan Range Pan Range can be selected.
  • Page 18 Operating Instructions How to specify the Pan/Tilt Range Start up the web browser and access the Single Camera screen. Start up another web browser and access Camera Setup window. Arrange the Single Camera screen and Camera Setup window next to each other.
  • Page 19 Operating Instructions Status Status window displays general information about the Network Camera. Note The window may be useful when troubleshooting.

  • Page 20: Default Settings List

    Operating Instructions Default Settings List Factory Indispensable Items Default Note setting value DDNS No check Network Your e-mail [Blank] Required when 5 to 255 address using DDNS Characters Name/ Adjust Clock for No check Time Summer Time Start/End Day March/ Month October Start/End Day...
  • Page 21 Operating Instructions Factory Indispensable Items Default Note setting value Pan Range -60 degree -60—+60 degree (Minimum) (Home Position) 0 degree -60—+60 degree (Maximum) +60 degree -60—+60 degree Camera Setup Tilt Range -45 degree -45—0 degree (Minimum) (Home Position) -3 degree -45—0 degree (Maximum) 0 degree...

  • Page 22: Troubleshooting

    Operating Instructions Troubleshooting Problem Cause and Remedy Top Page does When you use DDNS, you need to set Default Gateway and DNS not appear. server address. Refer to page 3 for DDNS feature. Image Transfer Select [One Time] for Login Timing when transferring images by on e-mail or FTP FTP in short duration time.
  • Page 23 Operating Instructions...
  • Page 24 Operating Instructions are subject to change without notice. Copyright: This manual is copyrighted by Panasonic Communications Co., Ltd. (PCC). Under the applicable copyright laws, this manual may not be reproduced in any form, in whole or part, without the prior written consent of PCC.

This manual is also suitable for:

Kx-hcm10

Table of Contents