Panasonic KX-HCM10 Operating Instructions Manual page 101

Operating Instructions
Problem
The color of the
image is strange.
Image is noisy.
Power LED does
not light up.
Power LED
continues blinking.
Refreshing interval
is slower than the
setup.
• Please adjust White Balance by the Camera Setup window.
Please refer to Page 76.
• Please check if the color setting of the PC is 16 bits or more.
• If the object is dark, it will have more noise on the image.
Please make the condition around the Network Camera
brighter.
• Wrong power line frequency makes noise on the screen.
Please refer to Page 76.
• Please check if the standard AC adapter (PQLV10Y) is
used.
• Please check if the LED control is disabled. Please refer to
Page 81 for the LED Control window.
Please check if you can access the Network Camera with the
web browser.
• When the Update Firmware failed, please refer to Page
102.
• The breakdown of the server or the congestion on the
network traffic in using DHCP can prevent the Network
Camera from getting the IP address. Please ask the
network administrator or ISP .
• If you can not access the Network Camera, the Network
Camera hardware may be defective. Please call our
customer call center.
• The traffic of the network, PC performance and the object
of the image affect the refreshing interval. The network
congestion causes refreshing interval slower than the set
up.
• When more than one clients were viewing, the refreshing
interval becomes slower.
• Ethernet switching hub can smooth the refreshing interval
especially in viewing on the Multi-Camera screen.
• Please check the Max. Bandwidth Usage.
Please refer to Page 32.
Cause and Remedy
101