Image Transfer - Panasonic KX-HCM10 Operating Instructions Manual

Operating Instructions

Image Transfer

Image Transfer window can set the Image Transfer feature. The Network
Camera can buffer images and send the images via e-mail or FTP. The request
to send the image is initiated by a contact closure from an external sensors/
devices connected to the I/O Connector using the Alarm mode. The external
sensors/devices is customer provided. The images can also be sent in the interval
of time using the Timer mode.
Non Transfer : No trigger is set.
Alarm mode
Timer mode
Note
The Alarm and Timer mode cannot be set at the same time.
: The alarm trigger activates transferring the image. Please refer
to Page 58.
: The timer trigger activates transferring the image. Please refer
to Page 63.
57