About Image Buffer/Transfer - Panasonic BL-C10 Installation & Troubleshooting Manual

Troubleshooting

2.7 About Image Buffer/Transfer

Problem
The camera
does not
transfer the
image by E-mail
or FTP.
The camera
does not
transfer the
image to a
mobile phone.
The image is
slowed down on
the Buffered
Image page. Or
the camera
transfers the old
image.
• The default gateway and DNS server addresses are not
assigned correctly.
Assign them correctly (see page 29 of the Operating
Instructions in the Setup CD-ROM).
• Login ID and password for E-mail or FTP are invalid.
Make sure that you enter your correct login ID and password.
• The image quality is not set to [Mobile Phone] on the Image
Buffer/Transfer page.
Set the resolution to [160 x 120] and the image quality to
[Mobile Phone]. Some mobile phones do not support 320 x
240 resolution.
• The transfer interval is too short.
Set the transfer interval longer than the current setting (see
page 55 or page 63 of the Operating Instructions in the Setup
CD-ROM).
Cause and Remedy
Installation/Troubleshooting
29