Panasonic KX-HCM10 Operating Instructions Manual page 67

Operating Instructions
Non transfer mode
Non transfer mode enables [Start Capture] on the Operation Bar to buffer the
image on the Single Camera screen. Please refer to Page 48. Non transfer mode
can lock [Start Capture] on the Operation Bar to prevent the user from capturing
the Buffering Image. Click [Clear Buffered images] to clear the buffered image.
[Clear Buffered images] does not save the parameters.
1.
Click [Image Transfer] on the Setup Page.
2.
Select the each parameter. Click [Save] when finishing.
• Click [Cancel] to quit the current settings. It returns to the Setup Page
without saving the parameters.
Transfer in the Alarm Mode
The Alarm mode can transfer the image via e-mail or FTP when the alarm trigger
is active. To activate the alarm trigger, the digital input terminal of the I/O
Connector must be connected with the external sensors/devices. The Alarm mode
can send only the e-mail without transferring the image. The Alarm mode uses the
Network Camera internal clock. Please make sure Date and Time setting has
been configured. Please refer to Page 59 about Date and Time setting.
1.
Click [Alarm] on the Image Transfer window.
67