Panasonic KX-HCM10 Operating Instructions Manual page 23

Operating Instructions
3.
Click [Network Camera Configuration]. The Network Camera List window
appears. The Setup program finds all the Network Cameras connected in the
LAN. The Network Camera List window lists all of the MAC addresses and
IP addresses of the Network Camera on the network.
Note
The software on the Setup CD-ROM assists you with the installation of the
Network Camera. It locates and identifies the Network Camera by listening
for data which the Network Camera sends out for the first 20 minutes after
the Network Camera is powered up. If the installation is not completed
within 20 minutes, please temporarily disconnect the power to restart this
operation.
(i)
23