Panasonic KX-HCM10 Operating Instructions Manual page 59

Operating Instructions
Name/Time
Name/Time window is used to assign a name to each Network Camera. Date
and Time entered on the Name/Time window are used for the Alarm/Timer mode
in the Image Transfer feature and on the Buffering Image screen.
1.
Click [Name/Time] on the Setup Page.
2.
Enter the Camera Name and Date and Time setting. Click [Save] when
finishing.
• Click [Cancel] to quit the current settings. It returns to the Setup Page
without saving the parameters.
Camera
Name
Date and
Time
Instructions for the data fields
The Camera Name appears on the Single Camera screen.
Please refer to unavailable characters set 1 on Page 35.
First click [AM/PM] or [24H]. The display changes in each time
mode.
Date and Time are used in the Alarm/Timer mode in Image
Transfer feature and time stamp on the Buffering Image screen.
59