Panasonic KX-HCM10 Operating Instructions Manual page 78

Multi-Camera
The Multi-Camera window enables the setting of Multi-Camera screen. The
Network Camera names and IP addresses of each image must be entered to view
the Multi-Camera screen. Registering IP addresses of the other Network Camera
enables you to view on the Multi-Camera screen. Clicking the Camera Name on
the Multi-Camera screen accesses the Single Camera screen to control the
image. First camera is named on the Name/Time window on Page 59. 2nd to 4th
cameras are named on this Multi-Camera window.
Note
When using the Multi-Camera screen, all additional Network Cameras must be
defined on each of the Multi-Camera window. This will allow all Network
Cameras to be seen and selected from each Network Camera in the entire
network.
1.
Click [Multi-Camera] on the Setup Page.
Note
Overlapping IP address on the Multi-Camera window confuses the
network.
78
Operating Instructions