Network Camera Reset Procedure - Default Settings - Panasonic KX-HCM10 Operating Instructions Manual

3.2 Network Camera reset procedure – default
settings
If the user forgets the settings or passwords, the Network Camera can be easily
reset to the default settings.
With power on, press the CLEAR SETTING button for about 1 second. The
Power LED in the front of the Network Camera fades and blinks for about 45
seconds when the Pan/Tilt motors will set to the center position. The entire
procedure takes about 1 minute.
Note
When pressing the CLEAR SETTING button, all buffered images are cleared.
90
CLEAR SETTING button
(Press the button with a
pencil or a pointed object)
Operating Instructions