Registering Products-Mandatory For Validating Slas - Juniper EX4300 Hardware Manual

Table 85: Inventory of Components Provided with an EX4300 Switch (continued)
Component
Mounting brackets
Mounting screws
Rubber feet
RJ-45 cable and RJ-45 to DB-9 serial port adapter
Quick Start installation instructions
Juniper Networks Product Warranty
End User License Agreement
Related
Documentation
Registering Products—Mandatory for Validating SLAs
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
NOTE: You must provide the appropriate mounting screws for mounting the
switch on a rack or a cabinet.
EX4300 Switches Hardware Overview on page 3
Unpacking an EX4300 Switch on page 151
Register all new Juniper Networks hardware products and changes to an existing installed
product on the Juniper Networks website. Registration is mandatory for activating your
hardware service-level agreements (SLAs).
CAUTION: Register product serial numbers on the Juniper Networks website
and update the installation base data if there is any addition or change to
the installation base or if the installation base is moved. Juniper Networks
will not be held accountable for not meeting the hardware replacement SLAs
for products that do not have registered serial numbers or accurate installation
base data.
Register your products at:
Update your installation base at:
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp
Contacting Customer Support to Obtain Return Materials Authorization for Switches
on page 250
Quantity
2
8
4
1
1
1
1
https://tools.juniper.net/svcreg/SRegSerialNum.jsp
Chapter 10: Unpacking the Switch
.
.
153