EX4300 Switch Hardware Guide
SFP+ Direct Attach Cables for EX Series Switches
Cable Specifications
Table 72: Software Support for SFP+ Passive Direct Attach Cables for EX Series Switches
Switch
EX3200 switches
EX4200-24T, EX4200-24T-DC, EX4200-24P,
EX4200-24PX, EX4200-24F, EX4200-24F-DC,
EX4200-48T, EX4200-48T-DC, EX4200-48P,
and EX4200-48PX switches
EX4200-24F-S and EX4200-48T-S switches
EX3300 switches
128
Removing a Transceiver from a Switch on page 237
Small form-factor pluggable plus transceiver (SFP+) direct attach copper cables, also
known as Twinax cables, are suitable for in-rack connections between servers and
switches. They are suitable for short distances of up to 7 m (23 ft), making them ideal
for highly cost-effective networking connectivity within a rack and between adjacent
racks. See
Figure 39 on page
Figure 39: SFP+ Direct Attach Cables for EX Series Switches
This topic describes:
Cable Specifications on page 128
Standards Supported by These Cables on page 132
EX Series switches support SFP+ passive direct attach cables. The passive Twinax cable
is a straight cable with no active electronic components. EX Series switches support 1 m,
3 m, 5 m, and 7 m long SFP+ passive direct attach cables.
Table 72 on page 128
describes the support for SFP+ passive direct attach cable lengths
on EX Series switches for Junos OS releases.
Software Support Added
Junos OS Release 10.3
Junos OS Release 10.3
Junos OS Release 12.3R4
Junos OS Release 11.3
128.
Cable Length
1 m (3 ft), 3 m (10 ft), 5 m (16 ft), and 7 m
(23 ft)
1 m (3 ft), 3 m (10 ft), 5 m (16 ft), and 7 m
(23 ft)
1 m (3 ft), 3 m (10 ft), 5 m (16 ft), and 7 m
(23 ft)
1 m (3 ft), 3 m (10 ft), 5 m (16 ft), and 7 m
(23 ft)
Copyright © 2015, Juniper Networks, Inc.