Mounting An Ex4300 Switch In A Recessed Position In A Rack Or Cabinet; Mounting An Ex4300 Switch On A Wall - Juniper EX4300 Hardware Manual
Hide thumbs
Also See for EX4300:
- Hardware manual (415 pages) ,
- Quick start manual (11 pages) ,
- Manual (9 pages)
Table of Contents
Advertisement
Related
Documentation
Mounting an EX4300 Switch in a Recessed Position in a Rack or Cabinet
Related
Documentation
Mounting an EX4300 Switch on a Wall
Copyright © 2015, Juniper Networks, Inc.
Connecting Earth Ground to an EX Series Switch on page 167
Connecting AC Power to an EX4300 Switch on page 173
Connecting DC Power to an EX4300 Switch on page 176
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 205
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 208
Mounting an EX4300 Switch in a Recessed Position in a Rack or Cabinet on page 163
Rack-Mounting and Cabinet-Mounting Warnings on page 278
You can mount an EX4300 switch in a recessed position on two posts of either a two-post
rack or a four-post rack such that the switch is recessed inside the rack from the rack
front by 2 inches. To mount the switch in a recessed position, use the front-mounting
brackets provided in the separately orderable four-post rack-mount kit.
Reasons to mount the switch in a recessed position include:
You are mounting the switch in a cabinet and the cabinet doors do not close completely
unless the switch is recessed.
The switch you are mounting has an uplink module with transceivers installed in it—the
transceivers in the uplink module ports protrude from the front of the switch.
To mount the switch in a recessed position, on two-posts or on four-posts, follow the
instructions in
"Mounting an EX4300 Switch on Two Posts of a Rack or Cabinet" on
page 157
or
"Mounting an EX4300 Switch on Four Posts of a Rack or Cabinet" on page
Connecting Earth Ground to an EX Series Switch on page 167
Rack-Mounting and Cabinet-Mounting Warnings on page 278
You can mount an EX4300 switch on a wall by using the separately orderable wall-mount
kit.
Before mounting the switch on a wall:
Verify that the site meets the requirements described in
for EX4300 Switches" on page
Read
"General Safety Guidelines and Warnings" on page
to
"Chassis Lifting Guidelines for EX4300 Switches" on page
Remove the switch from the shipping carton (see
page
151).
Ensure that you have the following parts and tools available:
"Site Preparation Checklist
83.
265, with particular attention
"Unpacking an EX4300 Switch" on
Chapter 11: Installing the Switch
159.
275.
163
Advertisement
Table of Contents
