Table 70: Optical Interface Support For Sfp+ Transceivers In Ex4300 - Juniper EX4300 Hardware Manual

EX4300 Switch Hardware Guide
Table 70: Optical interface Support for SFP+ Transceivers in EX4300 Switches
Ethernet
Standard Specification
10GBASE-USR Model number
Rate
Connector type
Fiber count
Transmitter wavelength
Minimum launch power
Maximum launch power
Minimum receiver sensitivity
Maximum input power
Fiber type
Core/Cladding size
Fiber grade
Modal bandwidth
Distance
DOM support
Support for Virtual Chassis
configuration
Software required
118
Value
EX-SFP-10GE-USR
10 Gbps
LC
Dual
850 nm
–7.3 dBm
–1.3 dBm
–11.1 dBm
–1.0 dBm
MMF
62.5/125 µm 50/125 µm
OM1 OM3
200 MHz/km 500 MHz/km
10 m (32.8 ft) 30 m (98.4 ft)
Available
Yes
EX4300-24T, EX4300-24P, EX4300-48T, EX4300-48T-AFI,
EX4300-48P, EX4300-48T-DC, and EX4300-48T-DC-AFI
switches—Junos OS for EX Series switches, Release 13.2X50-D10 or
later
EX4300-32F switches—Junos OS for EX Series switches, Release
13.2X51-D15 or later
EX4300-24T-S, EX4300-24P-S, EX4300-32F-S, EX4300-48T-S, and
EX4300-48P-S switches—Junos OS for EX Series switches, Release
13.2X51-D26 or later
50/125 µm
OM3
1500 MHz/km
100 m (328 ft)
Copyright © 2015, Juniper Networks, Inc.