Lcd Panel In Ex4300 Switches; Chassis Components And Descriptions - Juniper EX4300 Hardware Manual

Related
Documentation

LCD Panel in EX4300 Switches

Copyright © 2015, Juniper Networks, Inc.
NOTE:
The following switch models ship with one power supply (AC or DC) and two
fan modules preinstalled:
EX4300-24T
EX4300-24P
EX4300-32F
EX4300-32F-DC
EX4300-48T
EX4300-48T-AFI
EX4300-48P
EX4300-48T-DC
EX4300-48T-DC-AFI
The following switch models ship without any power supply or fan modules
preinstalled:
EX4300-24T-S
EX4300-24P-S
EX4300-48T-S
EX4300-48P-S
Uplink modules and transceivers are not part of the shipping configuration.
If you want to purchase any of these components, power supplies, or fan
modules for your switch, you must order them separately.
NOTE: If you have a Juniper J-Care service contract, register any addition,
change, or upgrade of hardware components at
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp
Failure to do so can result in significant delays if you need replacement parts.
This note applies if you change the type of power supply or add a new type
of uplink module. It does not apply if you replace these components with the
same type of component.
Installing and Removing EX4300 Switch Hardware Components on page 165
The LCD panel on the front panel of the EX4300 switch shows two lines of text, each
with a maximum of 16 characters. The LCD panel displays a variety of information about
Chapter 2: Chassis Components and Descriptions
.
25