Figure 54: Connecting A Switch To A Network For Out-Of-Band Management - Juniper EX4300 Hardware Manual

EX4300 Switch Hardware Guide
Related
Documentation
182
See EX2200 Switches Hardware Overview.
See Rear Panel of an EX3200 Switch.
See Rear Panel of an EX3300 Switch.
See Rear Panel of an EX4200 Switch.
See "EX4300 Switches Hardware Overview" on page 3
See Front Panel of an EX4500 Switch.
See EX4550 Switches Hardware Overview
See Switch Fabric and Routing Engine (SRE) Module in an EX6200 Switch.
See Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch.
See Routing Engine (RE) Module in an EX8216 Switch.
See Front Panel of an XRE200 External Routing Engine.
See OCX1100 Switches Hardware Overview.
Connect the other end of the Ethernet cable to the management device.
2.

Figure 54: Connecting a Switch to a Network for Out-of-Band Management

Connecting a Switch to a Management Console on page 183
Management Port Connector Pinout Information for an EX2200 Switch
Management Port Connector Pinout Information for an EX3200 Switch
Management Port Connector Pinout Information for an EX3300 Switch
Management Port Connector Pinout Information for an EX4200 Switch
Management Port Connector Pinout Information for an EX4300 Switch on page 142
Management Port Connector Pinout Information for an EX4500 Switch
Copyright © 2015, Juniper Networks, Inc.