File System Usage; Chassis Viewer; Table 46: Chassis Viewer For Ex2200 Switches - Juniper EX4300 Hardware Manual

EX4300 Switch Hardware Guide

File System Usage

Chassis Viewer

Table 46: Chassis Viewer for EX2200 Switches

Field
Front View
Interface status
Rear View
Management ( ) port
me0
Console port
68
To display the file system storage details of a switch in the backup or linecard role, click
the image of that switch.
Click the button to see the back of the chassis image. Click the
Rear View
button to see the front of the chassis image. In a Virtual Chassis configuration, the
button is disabled if the switch is not selected.
View
Table 46 on page 68—Describes the chassis viewer for EX2200 switches.
Table 47 on page 69—Describes the chassis viewer for EX2200-C switches.
Table 48 on page 69—Describes the chassis viewer for EX3200, EX3300, and EX4200
switches.
Table 49 on page 71—Describes the chassis viewer for EX4300 switches.
Table 50 on page 72—Describes the chassis viewer for EX4500 switches.
Table 51 on page 73—Describes the chassis viewer for EX4550 switches.
Table 52 on page 75—Describes the chassis viewer for EX6210 switches.
Table 53 on page 75—Describes the chassis viewer for EX8208 switches.
Table 54 on page 77—Describes the chassis viewer for EX8216 switches.
Table 55 on page 77—Describes the chassis viewer for the XRE200 External Routing
Engines.
Description
In the image, the following colors denote the interface status:
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
The management port is used to connect the switch to a management device for out-of-band
management.
The console port is used to connect the switch to a management console or to a console
server. (You might do this for initial switch configuration.)
Front View
Copyright © 2015, Juniper Networks, Inc.
Rear