Table 69: Optical Interface Support For Fast Ethernet Sfp Transceivers In Ex4300 - Juniper EX4300 Hardware Manual

Table 69: Optical interface Support for Fast Ethernet SFP Transceivers in EX4300 Switches
Ethernet
Standard Specification
100BASE-FX Model number
NOTE: Only the
Rate
SFP network
ports on 32-port
Connector type
EX4300 switches
support Fast
Ethernet SFP
Fiber count
transceivers.
The built-in uplink
Transmitter wavelength
ports or the uplink
module ports do
not support Fast
Minimum launch power
Ethernet SFP
transceivers.
Maximum launch power
Minimum receiver sensitivity
Maximum input power
Fiber type
Core/Cladding size
Fiber grade
Modal bandwidth
Distance
DOM support
Support for Virtual Chassis
configuration
Software required
Copyright © 2015, Juniper Networks, Inc.
Value
EX-SFP-1FE-FX
100 Mbps
LC
Dual
1310 nm
–20 dBm
–14 dBm
–32.5 dBm
–8 dBm
MMF
62.5/125 µm
FDDI/OM1
500 MHz/km
2 km (1.2 miles)
Not available
No
EX4300-32F switches—Junos OS for EX Series switches, Release
13.2X51-D15 or later
EX4300-32F-S switches—Junos OS for EX Series switches, Release
13.2X51-D26 or later
Chapter 8: Transceiver and Cable Specifications
117