Juniper EX4300 Hardware Manual page 43

Table 10: CLI Equivalents of Terms Used in the Documentation for EX4300 Switches (continued)
Hardware
Item (CLI) Description (CLI)
FPC (n) Abbreviated name of
the Flexible PIC
Concentrator (FPC)
One of the following:
EX4300-24T
EX4300-24P
EX4300-32F
EX4300-48T
EX4300-48P
PIC (n) Abbreviated name of
the Physical Interface
Card (PIC)
One of the following:
24x 10/100/1000
BASE-T
48x 10/100/1000
BASE-T
32x1G SFP
For 24-port and
48-port switches:
4x40GE
For 32-port
switches: 2x40GE
For 24-port and
48-port switches:
4x 1G/10G
SFP/SFP+
For 32-port
switches, one of
the following:
8x1G/10G
SFP/SFP+
2x40GE
Copyright © 2015, Juniper Networks, Inc.
Value Item In Documentation
n is a value in the range 0
through 9.
On a standalone switch, In this case, FPC refers to
the default value is 0. the switch itself.
On a Virtual Chassis In this case, the FPC
configuration, the values number refers to the
correspond to the member ID assigned to
assigned member IDs of the switch.
switches in the Virtual
Chassis.
n is a value in the range 0
through 2.
PIC 0
PIC 1 Built-in QSFP+ ports
PIC 2 Uplink module installed in
the switch
Chapter 1: System Overview
Additional Information
Understanding Interface
Naming Conventions on EX
Series Switches
Understanding Interface
Naming Conventions on EX
Series Switches
In 24-port and 48-port "EX4300 Switches
switches—PIC 0 stands Hardware Overview" on
for built-in network page 3
ports numbered 0
through 23 or 0 or
through 47.
In 32-port
switches—PIC 0 stands
for built-in network
ports followed by SFP+
uplink ports. In the CLI
output, the network
ports are numbered 0
through 31 and the
SFP+ uplink ports are
numbered 32 through
35.
"EX4300 Switches
Hardware Overview" on
page 3
"Uplink Modules in
EX4300 Switches" on
page 29
21