Wall-Mounting Warning For Ex4300 Switches; Grounded Equipment Warning - Juniper EX4300 Hardware Manual

EX4300 Switch Hardware Guide

Wall-Mounting Warning for EX4300 Switches

Related
Documentation

Grounded Equipment Warning

282
Mounting an EX8208 Switch on a Rack or Cabinet
Mounting an EX8216 Switch on a Rack or Cabinet
Mounting an EX9200 Switch on a Rack or Cabinet Using a Mechanical Lift
Mounting an EX9204 Switch on a Rack or Cabinet Without Using a Mechanical Lift
Mounting an EX9208 Switch on a Rack or Cabinet Without Using a Mechanical Lift
Mounting an OCX1100 Switch
Mounting a QFX3100 Director Device on Four Posts in a Rack or Cabinet
Mounting a QFX3100 Director Device on Two Posts in a Rack or Cabinet
Mounting a QFX3008-I Interconnect Device on a Rack or Cabinet Using a Mechanical
Lift
Mounting a QFX3600 or QFX3600-I Device on Four Posts in a Rack or Cabinet
Mounting a QFX3600 or QFX3600-I Device on Two Posts in a Rack or Cabinet
Mounting a QFX3500 Device in a Rack or Cabinet
Mounting a QFX5100 Device in a Rack or Cabinet
WARNING: When mounting an EX4300 switch chassis in a vertical position,
orient the front panel of the chassis downward to ensure proper airflow and
meet safety requirements in the event of a fire.
Mounting an EX4300 Switch on a Wall on page 163
This topic applies to hardware devices in the EX Series product family, which includes
EX Series switches, the EX Series Redundant Power System (RPS), and the XRE200
External Routing Engine.
This topic also applies to hardware devices in the QFX Series and to OCX1100 switches.
WARNING: The device is intended to be grounded. During normal use, ensure
that you have connected earth ground to the chassis.
Waarschuwing Deze apparatuur hoort geaard te worden Zorg dat de
host-computer tijdens normaal gebruik met aarde is verbonden.
Varoitus Tämä laitteisto on tarkoitettu maadoitettavaksi. Varmista, että
isäntälaite on yhdistetty maahan normaalikäytön aikana.
Copyright © 2015, Juniper Networks, Inc.