Juniper EX4300 Hardware Manual page 235

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
user@switch> set chassis display message message fpc-slot slot-number
To display a custom message permanently:
On an EX3200 switch, a standalone EX3300 switch, a standalone EX4200 switch, a
standalone EX4300 switch, a standalone EX4500 switch, a standalone EX4550 switch,
an EX6200 switch, an EX8200 switch, or an XRE200 External Routing Engine:
user@switch> set chassis display message message permanent
On an EX3300, EX4200, EX4300, EX4500, or EX4550 switch in a Virtual Chassis
configuration:
user@switch> set chassis display message message fpc-slot slot-number permanent
NOTE: The buttons on the LCD panel are disabled when the LCD is configured
to display a custom message.
To disable the display of the custom message:
user@switch> clear chassis display message
You can view the custom message by issuing the
LCD Panel in EX3200 Switches
LCD Panel in EX3300 Switches
LCD Panel in EX4200 Switches
LCD Panel in EX4300 Switches on page 25
LCD Panel in EX4500 Switches
LCD Panel in EX4550 Switches
LCD Panel in an EX6200 Switch
LCD Panel in an EX8200 Switch
LCD Panel in an XRE200 External Routing Engine
Chapter 14: Performing Initial Configuration
command.
show chassis lcd
213