Connecting Ac Power To An Ex4300 Switch - Juniper EX4300 Hardware Manual

Connecting AC Power to an EX4300 Switch

Copyright © 2015, Juniper Networks, Inc.
Connecting AC Power to an EX4550 Switch
Connecting DC Power to an EX4550 Switch
Connecting AC Power to an EX6200 Switch
Connecting DC Power to an EX6200 Switch
Connecting AC Power to an EX8200 Switch
Connecting DC Power to an EX8200 Switch
Connecting AC Power to an EX9204 Switch
Connecting DC Power to an EX9204 Switch
Connecting AC Power to an EX9208 Switch
Connecting DC Power to an EX9208 Switch
Connecting AC Power to an EX9214 Switch
Connecting DC Power to an EX9214 Switch
General Safety Guidelines and Warnings on page 265
Grounded Equipment Warning on page 282
EX4300 switches support 350 W, 715 W, or 1100 W AC power supplies depending on the
switch model. After you install at least one power supply, you can connect power to the
switch.
CAUTION: Do not mix:
AC and DC power supplies in the same chassis
Power supplies with different airflow labels (
) in the same chassis.
(AFO)
Fan modules with different airflow labels (
in the same chassis.
Power supplies and fan modules with different airflow labels (
and
AIR OUT (AFO)
Before you begin connecting AC power to an EX4300 switch:
Ensure that you have taken the necessary precautions to prevent electrostatic discharge
(ESD) damage (see "Prevention of Electrostatic Discharge Damage" on page
Ensure that you have connected the device chassis to earth ground.
Chapter 12: Connecting the Switch to Power
AIR IN (AFI)
) in the same chassis.
AIR IN (AFI) and AIR OUT
and
AIR OUT (AFO)
AIR IN (AFI)
299).
)
173